18Sound

SPEAKER 18SOUND 10" 10NMB420

(No reviews yet) Write a Review
SKU:
62634
MPN:
0adfd74a-1584-11e9-ef2a-d002fa63f25a
Shipping:
Calculated at Checkout
On Sale
  • SPEAKER 18SOUND 10" 10NMB420
  • SPEAKER 18SOUND 10" 10NMB420
  • SPEAKER 18SOUND 10" 10NMB420
  • SPEAKER 18SOUND 10" 10NMB420
  • SPEAKER 18SOUND 10" 10NMB420
  • SPEAKER 18SOUND 10" 10NMB420
MSRP: $79,065
Now: $51,392
Was: $79,065
— You save $27,673

Description

Eighteen Sound  10NMB420

Resonant frequency fS 65 Hz
Electrical Q QES 0.36
Mechanical Q QMS 4.60
Total Q factor QTS 0.33
Suspension equivalent air volume VAS 30 litres
DC resistance RE 10.5 Ω
Minimum impedance Zmin 11.9 Ω
Voice coil inductance LE 0.4 mH
Force factor B·l 19.5 T·m
Suspension mechanical resistance RMS 2.8 N·s/m
Suspension mechanical compliance CMS 177 µm/N
Moving mass MMD 26.8 g
Moving mass (including airload) MMS 31.5 g
Surface of the diaphragm SD 346 cm²
Effective diaphragm diameter Ø 21 cm
Maximum linear excursion Xmax ± 4 mm
Excursion limit Xlim ± 12.5 mm
Displacement volume at Xmax VD 138.4 cm³
Efficiency η₀ 2.23 %
Efficiency bandwidth product EBP 180
Overall diameter 260 mm
Baffle hole diameter 232 mm
Overall depth 122 mm
Flange thickness 11 mm
Net weight 3 kg
Diaphragm material Curvilinear, Treated paper
Surround material M-roll, Polycotton
Voice coil diameter 65 mm
Coil material Aluminum
Magnet Neodymium
SIZE
260 mm
MAX POWER
500 W
SPL
99 dB
FREQUENCY RANGE
65 - 5000 Hz
DC RESISTANCE
10.5 Ω
The 10NMB420 neodymium transducer has been developed in response to a specific market requirement for a 10" midbass driver that combines excellent linearity with good efficiency and high power handling capabilities. The 10NMB420 is primarily intended for use as a midbass driver in line-arrays as well as high quality 2-way or multiway reflex enclosures. The low pass filter might be positioned as high as 2000Hz. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio. The 65mm Ø state-of-the-art, aluminum wire voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglas former used to carry windings on both the outer and inner surfaces, in order to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high BL force factor. The voice coil is cooled through airways placed between the chassis back plate and the magnet faceplate. In this way heated air is channeled away from the voice coil and the gap. Another technology present into the 10NMB420 is the SDR (Single Demodulating Ring), used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion. Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is an extra key feature of the 10NMB420. This is achieved trough an exclusively developed cone treatment which renders the cone humidity repellent while does not increasing the total moving speaker mass.

Speaker

  • Size: 10"
  • Power rating: 350 W AES
  • Impedance: 8 Ohm
  • 99 dB SPL 1W/1m
  • Frequency range: 65 - 5000 Hz
  • Qts 0.33
  • Fs 65 Hz
  • Weight: 3 kg
  • Neodymium chassis
View AllClose