Kicker

AMPLIFIER CAR KICKER IX1000.1 1CH MONO

(No reviews yet) Write a Review
SKU:
713034054535
Shipping:
Calculated at Checkout
On Sale
  • AMPLIFIER CAR KICKER IX1000.1 1CH MONO
  • AMPLIFIER CAR KICKER IX1000.1 1CH MONO
  • AMPLIFIER CAR KICKER IX1000.1 1CH MONO
Now: $628.33
Was: $698.15

Description

The compact chassis of each Kicker IX Series amp hides a technical powerhouse. They use the same voltage-boost technology found in some electric-hybrid vehicles to achieve over 90% efficiency — which means you get more power from a smaller, cooler amp. Kicker combined this high-current design with Class D technology to unleash more wattage per cubic inch than just about any other amp around. And an IX Series amp runs so cool you can stack multiple amps together for a professional-looking installation.

The IX1000.1 mono subwoofer amplifier delivers up to 1,000 watts RMS to your sub so you can enjoy a big kick to your music. You can use the subsonic filter to eliminate unwanted signals, and shape the bass with the low-pass filter. Noise-reducing technology removes interference from your car's electrical system as it enters the amp's inputs, so that your subs see the purest signal possible. Kicker includes a wired remote control so you can dial in just the right amount of bass boost from the driver's seat.

Confused about impedance? Check out our article on matching subs and amps.

READ LESS

Product highlights:

  • mono subwoofer amplifier
  • 550 watts RMS x 1 at 4 ohms (1,000 watts x 1 at 2 ohms)
  • variable low-pass filter (50-200 Hz at 24 dB per octave)
  • variable bass boost (0-18 dB at 40 Hz)
  • selectable subsonic filter (24 dB at 25 Hz)
  • wired remote bass level control
  • Class D design
  • CEA-2006 compliant
  • balanced differential inputs
  • speaker-level inputs (requires an optional adapter)
  • preamp inputs and outputs
  • 4-gauge power and ground leads and a 100-amp fuse recommended — wiring and hardware not included with amplifier
  • no onboard fuses — when installing multiple amps in a system, an additional 100-amp in-line fuse between the distribution block and the amplifier is recommended
  • optional IX mounting kit required for stacking amps
  • 9-3/8"W x 2-3/16"H x 8-1/2"D
  • MFR # 10iX10001

What's in the box:

  • Mono-Channel amplifier
  • Remote bass-level control knob
  • 20' Remote connector cable (with an RJ-45 jack on each end)
  • Four 2" self-tapping screws
  • Two 3/8" self-tapping screws
  • Metal bracket
  • 4 Flat washers
  • Hex-key
  • Instruction Booklet (Eng/Fre/Spa)
  • Certified Power Certificate
View AllClose